5250 Flowmeter

The CDI 5250 is a modified version of the 5200 model that allows installation under pressure. It incorporates two valves through which the probes pass and a muffler that collects chips from the drilling process. It takes an equal amount of installation time as our standard meters and requires no shutdown of the compressed-air system. $865 – $975.

Features

  • No system shutdown required
  • Installs in minutes
  • Weather resistant and surge protected
  • Milliamp output
  • Pulse output convertible to threshold output
  • User-configurable scaling, filtering and units of measure
  • Optional wired and wireless outputs for networking

The installation of the 5250 is quick, easy and safe, if done with adequate preparation and with care. A solid footing and face protection are essential. Once installed, the meter provides the same features as our 5200-series meters.

Technical Specs

Number of Rings

2 Rings

Type of Pipe

Metric Aluminum, Sch. 40 Steel, Type L Copper

Nominal Pipe Sizes

1/2 in. – 1-1/2 in., 25 mm – 40 mm, DN15 – DN40

Accuracy

5 percent of reading plus 1 percent of range for flows from 10 percent to 100 percent of indicated range at air temperatures between 20 and 120 degrees Fahrenheit

Fluids

Compressed Air, Nitrogen

Operating Pressure

130 psig maximum

Input Power

250 mA at 24 Vdc

Output Resistance

600 Ohms max.

Exposed Materials

Stainless steel, gold, thermal epoxy and Viton (seal)

Ring Material

Aluminum

Display

Four digit LED display

Response Time

One second to 63 percent of change in value at flows above 30 percent of range.

Pricing

Model No

Nom. Pipe Size

Range (scfm)

Price

5250-05S

1/2" Steel

100

$865

5250-07C

3/4" Copper

150

$865

5250-07S

3/4" Steel

150

$865

5250-10C

1" Copper

200

$925

5250-10S

1" Steel

200

$925

5250-12C

1-1/4" Copper

300

$975

5250-12S

1-1/4" Steel

400

$975

5250-15C

1-1/2" Copper

400

$975

5250-15S

1-1/2" Steel

400

$975

5250-25M

25mm

200

$925

5250-40M

40mm

400

$975